Dry laminator SDL-1300
Design considering operability and automatic control system
Product features
One-touch replaceable sleeve impression cylinder and quick return exhaust system.
- The hot air exhaust system circulates, reducing environmental impact of undried residual solvent and prevents poor adhesion and odor.
- Supports thin and thick film.
- Sleeve impression cylinder can be exchanged with one touch function.
- Reduces operator's workload with design and automatic control system. Designed with careful consideration for safety during operation.
| Maximum machine speed |
200 m/min |
| Base material |
General plastic film, aluminum, paper |
Dry laminator that can be used for medical products and food packaging materials
| Dry laminating is performed by dissolving organic solvent in a emlsion type bonding with water adhesives. Dry lamination is commonly used for medical and food packaging because of its low risk of residual solvents on packaging. |
|
 |
| Water-based adhesives are also available |
|
Dry laminator SDL-1300 Specifications
| Base material |
| General plastic film · aluminum · paper |
|
| Base material width |
600- 1,200 mm (depending on request max. approx. 2,700 mm) |
| Roll face length |
1,300 mm (max. base material width + about 100 mm) |
| Machine speed |
max. 200 m / min (optional 250 m / min) |
| Unwind diameter |
φ 800 mm |
| Rewind diameter |
φ 900 mm |
| Dryer |
Overhead dryer |
| Heat source |
LPG gas, steam, electricity, etc. |
※ The above specifications are subject to change without notice.
※ The specifications can be flexibly customized according to customer request.
Other dry laminator
Narrow width dry laminator
| Model: SD-350 |
| |
| |
| Maximum machine speed |
100 m/min |
|
| Base material |
General plastic film, aluminum, paper |
|
- Compact narrow width
- Manual splicing device
- Cantilevered unwind and rewind
- Slitter installation option
- Corona equipment installation option
| Spepcial dry laminator |
| Model：SDL-1100-WS |
| Custom dry laminating unit, built upon customer request. |
| |
| Maximum machine speed |
150 m/min |
|
| Base material |
General plastic film, paper |
|
- Corresponds to special specifications according to custom order requirements
- Switchable between 2-axis winding (automatic paper splicing) and 4-axis winding (manual paper splicing)
- Laminator roll is compatible with hot water heat roll
